Distributors and importers sourcing pure sine wave inverters for Middle East markets need a model that is easy to specify, easy to install and easy to support after the sale. The TDM-Pro-1000 is a 1000 W rated pure sine wave inverter built around that buying logic: one clear power rating, separate voltage displays, fault-code indication and a protection set that covers the failures installers meet most often.
What the TDM-Pro-1000 is
The TDM-Pro-1000 delivers a 1000 W rated pure sine wave output. DC input and AC output are chosen by order configuration: DC input in 12 / 24 / 48 / 60 / 72 V versions, and AC output in 110 / 120 / 220 / 230 / 240 V versions, at 50 Hz or 60 Hz (confirm the configuration when ordering). The unit measures 275 × 112 × 55 mm and weighs 1.2 kg, so it fits compact installations such as small shops, kiosks and small offices.
Why pure sine wave matters for the loads it serves
A 1000 W rated output suits compact loads: lighting, fans, routers, point-of-sale terminals and small office equipment. Pure sine wave output is the safer choice for loads with motors or sensitive electronics, because it reproduces the smooth waveform those loads were designed for. It is not a whole-house backup unit, and it should not be sold as one. Matching the inverter to the load list first is what keeps returns and complaints low.
Voltage versions: the configuration to confirm before ordering
The most common ordering mistake with this series is the voltage version. The TDM-Pro-1000 is built to order, so the DC input voltage, the AC output voltage and the frequency must all be stated on the order. Buyers should confirm the destination market’s mains voltage and frequency, the battery system voltage, and the expected load list before placing the order, and ask the supplier to confirm the configuration in writing. A unit ordered in the wrong version cannot be fixed in the field.
Displays and fault codes: support that starts at the panel
The unit carries separate numeric displays for battery voltage and AC output voltage, so an installer can see both sides of the system without a meter. Fault-code indication points to the cause when the inverter stops: installers can tell a low-battery shutdown from an overload or a temperature trip, which shortens diagnosis and reduces unnecessary returns. The built-in protections cover under-voltage, over-voltage, overload, short-circuit and over-temperature.
A distributor checklist before ordering
Before requesting a quotation, prepare four things: the DC input voltage and AC output voltage and frequency for the destination market; the load list the 1000 W rating must cover; the order quantity and the packaging the shipment needs; and the documents the destination market requires. Order quantity, packaging, delivery time and certification documents should be confirmed with the supplier for each order, as they depend on the configuration and the destination.
Request a quotation
The TDM-Pro-1000 is supplied by Foshan Gerixi Electronic Co., Ltd., a manufacturer founded in 2010 with an 8,000 m² factory and a 220+ person R&D team. To check the configuration for your market and request a quotation, see the TDM-Pro-1000 product page and contact Gerixi with your battery voltage, AC voltage, frequency and target quantity.
