The TCI range gives distributors a compact group of modified sine wave battery inverters for backup, mobile power and small off-grid packages. The range includes several output levels and multiple DC input and AC output configurations, so the most useful comparison starts with the customer load, battery system and destination market.
Use the verified load list to choose capacity
TCI models are available across a capacity ladder that includes compact options such as the TCI-350 and TCI-500, followed by the TCI-1000 and TCI-1500. A higher number is not automatically the better choice. The continuous running load, start-up demand, battery voltage and expected runtime should all be checked before selecting a model.
The listed peak VA figure should not be treated as a guaranteed motor-start rating. Pumps, compressors, refrigerators, power tools and other inductive loads may require additional starting capacity. For these applications, ask for a model recommendation based on the actual load list rather than sizing from the nominal wattage alone.
Modified sine wave output needs a compatibility check
The TCI Series is specified with modified sine wave AC output. It can be suitable for verified loads such as basic lighting, chargers and compatible office or mobile equipment. It should not be treated as a universal replacement for a pure sine wave inverter. Sensitive electronics, audio equipment, some motors and equipment with strict waveform requirements should be checked before ordering.
Confirm the exact voltage and socket version
- Confirm whether the required DC input is 12 V, 24 V or another listed configuration.
- Specify the AC output voltage, frequency and socket type for the destination market.
- Match battery cable size and protection devices to the expected DC current.
- Allow for inverter losses when estimating battery capacity and runtime.
- Confirm under-voltage, over-voltage, overload, short-circuit, over-temperature and reverse-polarity protection.
The TCI products are described as battery inverters. They do not replace a solar charge controller or provide a direct PV charging function unless a specific model document states otherwise. In a solar backup package, pair the selected inverter with a correctly matched battery, charging system and protection hardware.
A clear quotation makes model comparison easier
For wholesale selection, send the target model or output, battery voltage, AC voltage, frequency, socket type, load list, quantity and destination country. Gerixi can then confirm the available configuration, packaging or branding options, lead time and technical documents for the requested version.
