For a distributor, a 2000W pure sine wave inverter is only as good as the checks it passes before it leaves the factory, and the support behind it after it arrives. The IPS-2000 from Foshan Gerixi Electronic Co., Ltd. turns battery power into AC power for off-grid and backup systems. This article explains what the factory checks, what distributors should verify on arrival, and how to raise a support request.
What the IPS-2000 is
The IPS-2000 delivers 2000W of continuous pure sine wave output. A colour LCD shows status and fault information, and the unit includes built-in battery precharge and reverse-polarity protection. Parameters can be controlled through a WeChat mini-program. The inverter measures 340 x 255 x 105 mm and weighs 4.2 kg net.
Voltage versions are configuration-dependent: DC input in 12 / 24 / 48 / 60 / 72 V versions, AC output in 110 / 120 / 220 / 230 / 240 V versions, and output frequency 50 Hz or 60 Hz. Confirm the exact version when ordering, so the units match the battery systems and AC loads in the target market.
How the factory prepares each unit
Gerixi was established in 2010 and combines product development, production, testing, packaging and service. For each product and order, the factory coordinates material checks, assembly, functional testing, model information, quantities and packing details. Functions, controls, displays and protection behaviour are checked according to the selected model, and label and packaging information is kept aligned with the production plan.
What distributors should check on arrival
A short receiving check on arrival saves time later:
- Model and version: confirm the units match the ordered DC input version, AC output version and 50 Hz or 60 Hz frequency.
- Display: power the unit up and confirm the colour LCD shows status normally and reports fault information when a fault is present.
- Protection: confirm precharge and reverse-polarity protection behave as specified before the unit goes to an end customer.
- Packing and labelling: check cartons, labels and quantities against the order, and keep the model and version details on file.
Getting support: what to include in a request
If a unit needs attention, a complete support request reaches a useful answer faster. Include the model (IPS-2000), the voltage version ordered, the fault information shown on the LCD, the battery voltage in use, and how many units are affected.
Support covers product information, configuration discussions, sample evaluation, packaging communication and shipment preparation. Questions can go through the Gerixi contact page or by email to abbywu@gerixi.com.
Confirm the configuration before ordering
Because DC input, AC output and frequency are version-dependent, confirm the exact version, socket standard and labelling with Gerixi before ordering. For OEM or private-label projects, model configuration, brand and label placement, enclosure colour, interface details, packaging and documentation are reviewed with the product and order requirements.
See the full specifications on the IPS-2000 product page, then send the target voltage, frequency, quantity and destination market through the contact page to start a supply discussion.
