The TPM-10kW is a low-frequency inverter/charger for projects that need a 10000 W rated output and a configurable battery and AC-voltage platform. For a distributor or system integrator comparing high-power solar inverter options, the product page provides a practical starting point: the database specification lists a 30000 VA surge rating and an optional built-in 80A MPPT controller.
Core TPM-10kW specifications
The listed continuous output power is 10000 W, with a 30000 VA surge rating. The DC input is available as version-dependent 12 / 24 / 48 / 60 / 72 V DC, while the AC output is available as version-dependent 110 / 120 / 220 / 230 / 240 V AC. The frequency is 50 Hz or 60 Hz, so the final configuration should be confirmed before an order is placed.
The inverter/charger has an optional built-in 80A MPPT controller and five operating modes. Its listed dimensions are 635 × 225 × 180 mm. Battery cables are not included, which should be included in the buyer’s installation and packing checklist.
Matching the inverter to an application
At 10000 W, the TPM-10kW is suited to larger off-grid solar, backup-power, and commercial or project-based battery-system planning where the required battery voltage and AC output version are known. The version-dependent DC input means that the battery bank should be selected together with the ordered inverter configuration, rather than assumed from the model name alone. If solar charging is required, the buyer should also confirm whether the optional 80A MPPT version is needed.
The specification does not identify an output waveform, efficiency, battery chemistry, or transfer time. Those items should therefore be confirmed with the supplier for the intended load and market. This is especially important when a project includes sensitive equipment or a defined changeover requirement.
What B2B buyers should confirm
For a wholesale inverter or bulk order, prepare the target quantity, required DC battery voltage, AC output voltage, 50 Hz or 60 Hz frequency, and whether the optional 80A MPPT controller is required. Also confirm the selected operating mode, cable scope, packaging, documentation, and any market-specific configuration before requesting a quotation. The product’s dimensions can help distributors review carton and installation-space planning, but the order specification should remain the final reference.
Request a configuration-based quotation
Review the TPM-10kW product details and send the battery voltage, AC voltage, frequency, MPPT requirement, load profile, and quantity through the GERIXI contact page. This gives the supplier the information needed to discuss the correct version for a distributor, integrator, or project purchase.
