The TDM-Pro-500 is a 500 W pure sine wave battery inverter with separate numeric displays for battery voltage and AC output voltage. Its compact 190 × 112 × 55 mm enclosure and 0.9 kg net weight make it a practical option for distributors comparing small backup and mobile AC power products.
What the TDM-Pro-500 displays and delivers
The model provides 500 W rated pure sine wave AC output and a listed 1000 VA peak rating. The two numeric displays show battery voltage and AC output voltage, with fault-code indication. It is a high-frequency battery inverter, not a direct PV-input product, and the peak VA figure should not be treated as continuous watts or a guaranteed motor-start capability.
Confirm the battery and AC configuration
Depending on the version, the TDM-Pro-500 can be configured for 12 V, 24 V, 48 V, 60 V or 72 V DC input, with 110 V, 120 V, 220 V, 230 V or 240 V AC output options. Output frequency may be 50 Hz or 60 Hz. Buyers should identify the exact battery voltage, AC voltage, frequency and socket before ordering rather than assuming every option is included in one unit.
Pure sine wave output is useful for battery-based backup and mobile AC installations where the connected equipment requires a clean waveform. The load list still needs to be checked for continuous power and starting demand. Under-voltage, over-voltage, overload, short-circuit, over-temperature and reverse-polarity protection are listed for the model.
Checklist for a supplier quotation
Send the model, quantity, battery voltage, AC output, frequency, socket type, load list and destination market when requesting a quotation. A manufacturer or supplier can then confirm the exact supplied configuration, packaging, MOQ, lead time and available branding options. For a solar battery installation, specify a separately matched charging system and confirm the cables, connectors and protection devices.
See the TDM-Pro-500 product page for details, or contact GERIXI with your battery and load requirements.
