For distributors and project buyers comparing a high-current MPPT solar charge controller, the SCC-120A provides a clear starting point for system matching. It is a 120 A MPPT controller with an LCD interface, configurable battery-voltage settings and a 3-phase interleaved buck topology. These details make it suitable for planning larger off-grid solar or battery-charging packages, while the final PV array and battery configuration still needs to be checked against the project design.
SCC-120A specifications from the product record
The SCC-120A is rated at 120 A charging current. Its system-voltage menu supports 12 / 24 / 48 / 60 / 72 / 96 V DC. The product record lists a PV voltage of 210 V DC, with 250 V DC maximum and a note to confirm array limits before ordering. The controller uses a 3-phase interleaved buck topology and includes LCD parameter settings. Its listed dimensions are 340 × 235 × 100 mm and its listed weight is 5.2 kg.
How to match the controller to a battery system
The wide menu range is useful when a buyer is comparing different battery-bank architectures, but it does not remove the need to confirm the actual operating voltage. A quotation request should identify the intended setting—12, 24, 48, 60, 72 or 96 V DC—and the battery chemistry. The database lists lead-acid and lithium batteries, with the charging profile to be configured. Buyers should also provide the PV array voltage and confirm that the array remains within the stated 210 V DC value and 250 V DC maximum limit.
Practical applications and boundaries
The SCC-120A can be evaluated for off-grid solar systems, battery-charging equipment and larger distributed power packages where a 120 A charging rating and configurable DC system voltage fit the design. The LCD can help operators review and set parameters during commissioning. It should not be specified solely by current rating: available battery voltage, PV voltage, battery type, enclosure space and the required operating profile all need to be confirmed. The published product record does not define an AC output, inverter function or whole-building backup capacity, so those claims should not be assigned to this controller.
What a B2B buyer should include in a quotation request
A distributor or system integrator preparing a bulk order should state the required quantity, target system voltage, battery chemistry, PV array voltage, installation environment and packaging or labeling requirements. The supplier can then confirm the compatible configuration, documentation, availability and commercial terms for the requested order. For product verification, review the SCC-120A product details before sending the specification sheet.
Next step for supplier evaluation
If you are sourcing a 120A MPPT solar charge controller for a 96V battery system or another supported DC voltage, send the intended battery, PV and quantity information through the GERIXI contact page. This gives the purchasing team the information needed to check the SCC-120A configuration and prepare a relevant response.
